JVC KS-FX202 Service Manual page 4

KS-FX202
Removing the heat sink (SeeFig.5)
1. Removing the front chassis.
2. Removing the bottom cover.
3. Remove the three screws ( 1 and 1` ) retaining the
heat sink.
Removing the main board assembly
( See Fig. 5 to 7)
1. Removing the front chassis.
2. Removing the bottom cover.
3. Removing the heat sink.
(
Attach the heat sink with a screw ( 1` ) on operat-
ing checks.
4. Remove the two screws ( 2 ) retaining the main
board assembly.
5. Remove the screw ( 3 ),the two screws(4) and the
four screws(5)retaining the rear panel .
6. Separate the main board assembly and cassette
mechanism assembly.
7. Take out the main board assembly.
1-4
1
)
Main board assembly
5
Rear panel
Heat sink
1`
Fig. 5
Fig. 6
3
Fig. 7
1
2
2
4
5