JVC KS-FX202 Service Manual page 11

Removing the mute switch board
1. Unsolder the two wires l on the mute switch board on
the back of the cassette mechanism assembly.
2. Remove the screw H
board.
Removing the power switch (See Fig.9)
Prior to performing the following procedure, remove
the motor assembly.
1. Unsolder the two wires m on the power switch on the
side of the cassette mechanism assembly.
2. Remove the screw I attaching the power switch.
(See Fig.8)
attaching the mute switch
Cassette mechanism assembly
Soldering l
Cassette mechanism assembly
Soldering m
I
Power switch
Rower switch
Motor assembly
H
switch board
Mute
Fig.8
Fig.9
KS-FX202
1-11