Panasonic KX-TD1232NE User Manual page 77

2.1
To confirm the assigned function data
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
access number
2
or
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
— If you wish to change the data, follow the programming procedure explained in this sec-
tion.
* A programming access number is required to program / confirm the function data by Station Programming.
Programming Instructions
1. Enter the programming access number* (0 through 9, 01 through
03, 1 and #).
• Each number corresponds to the data as follows:
- 1 : Preferred Line Assignment — Outgoing
- 2 : Preferred Line Assignment — Incoming
- 3 : Full One-Touch Dialling Assignment
- 4 : Intercom Alerting Assignment
- 5 : Call Waiting Tone Type Assignment
- 6 : Self-Extension Number Confirmation
- 7 : Key Click Tone On / Off Assignment
- 8 : Handset / Headset Selection
- 9 : Charge Fee Reference
- 01 : Remote Station Lock Control (— Operator only)
- 02 : Call Log Lock Control, Incoming (— Operator only)
- 03 : Live Call Screening Password Control (— Operator only)
- # : Station Programming Data Default Set
- 1: Live Call Screening Mode Setting
• The display shows the programmed data.
<Example>
When you press [5], the display shows:
C.W.
(— Call Waiting tone is now programmed to Tone 1)
2. Press the HOLD (END) button.
• The display shows the initial programming mode.
Tone 1
77