Phantom Button - Panasonic KX-TD1232NE User Manual

2.2

Phantom Button

Allows you to assign a Flexible (CO, DSS) button as the Phantom button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
2
8
3
Phantom extension number
4
or
...
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• The phantom extension number must be assigned in program [130] "Phantom Extension
Number Assignment" before assigning the Phantom button.
• A DSS button can be assigned as the Phantom button so that the operator can use it for
transferring a call.
• If you assigned the Phantom button to one of the CO buttons (13 through 24) on your KX-
T7230 telephone and change the telephone to a KX-T7235 model, you must re-program
the setting as the KX-T7235 telephone has only 12 CO buttons. If you do not change the
setting, the phantom extension call reaches the INTERCOM button.
Programming References
• System Programming — Added and Changed Features for Installation Manual
[130] Phantom Extension Number Assignment
Programming
(Assignment)
1. Press the desired Flexible (CO, DSS) button which you wish to
assign as the Phantom button.
2. Dial 88.
• The display shows:
8
3. Dial the phantom extension number.
• The display shows:
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER (
programming mode.)
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
EXT-
CLR
EXT-xxxx
CLR
) button becomes the CLEAR button while in the
(— xxxx: phantom extension
number)
21