Ringing Tone Selection For The Intercom Button - Panasonic KX-TD1232NE User Manual

2.2

Ringing Tone Selection for the Intercom Button

Allows you to assign a ringer frequency to the intercom button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
INT
or
2
INT
or
3
tone type number
4
or
...
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Condition
• The default is Ringing Tone Type 2.
26
Programming
1. Press the INTERCOM button which you wish to change the ring-
ing tone.
INT'
2. Press the same INTERCOM button again.
• The display shows the current status.
INT'
3. Enter the tone type number (1 through 8).
• The display shows the selected tone type number and you hear
the selected tone until the STORE button is pressed.
• If you want to change the tone type, enter another tone type
number in succession.
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
Tone type–x
(— x: tone type number)