Panasonic DVD-LA95 Operating Instructions Manual page 49

Portable dvd audio/video player
Table of Contents

Advertisement

Problem
The audio soundtrack or
subtitle language cannot
be changed.
Subtitles not shown.
Angles cannot be
changed.
You have forgotten your
ratings password.
You want to reset the unit
to the factory settings.
There is a lot of noise.
No sound from the unit's
speakers.
No sound from other
speakers.
Sound is not heard for
some tracks.
Distorted sound.
Some parts of the
soundtrack are missing.
Languages can only be selected if they are recorded on
the DVD.
Some DVDs require you to change the languages
through menus.
Subtitles appear only if they are recorded on the DVD.
Turn the subtitles on. B
Subtitles may fail to appear around the A and B points in
A-B repeat, and around the points you marked to play
again.
Angles can only be selected if they are recorded on the
DVD.
There may be parts of multi-angle DVDs where different
angles are not recorded.
Do the following to reset the unit to its original factory
settings. While the unit is stopped, press and hold
[;], [:] (backward), and [1, ON] on the main unit
for about 3 seconds until the message "Initialized"
disappears from the LCD, then turn the unit off.
Separate the unit from mobile phones if they are being
used close to each other.
The speakers are off if the LCD is closed or headphones
are connected. T
Turn up the volume. >
Check all connections and settings. O–R, T–U, [–]
Check input mode of the other equipment.
The track may be non-standard.
V.S.S. may cause distortion with some discs.
Turn V.S.S. off if this occurs. C
Output from this unit is in stereo (2 channels) when
V.S.S. is on. Turn V.S.S. off when you have used analog
connection and connected 3 or more speakers. C
Ensure the settings are appropriate to the speakers you
have connected. \–]
Some DVD-Audio specify the number of channels to be
played and prohibit down-mixing to 2 channels. If this is
the case, you will hear only part of the soundtrack when
played through this unit's speakers. "Multi-channel"
flashes on the LCD when you start playing such tracks.
Solution
49
RQT6050

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents