Functions Cannot Be Used Simultaneously - Panasonic NV-GS27GCT Operating Instructions Manual

LSQT1039ENG.book 51 ページ ２００６年２月１日 水曜日 午後３時１３分
CAN NOT USE USB:
You are connecting the USB cable with the
DV cable connected.
CHANGE TO MANUAL MODE:
You are attempting to select the item on the
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].
CAN NOT OPERATE (MOTION DV MODE):
You are attempting to change [D.ZOOM]
setting during MotionDV Mode.
REVERSE THE LCD MONITOR:
When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
TURN OFF THE VIDEO LIGHT:
You are attempting to select an item in
[SCENE MODE] when light is on.
CANCEL NIGHT VIEW MODE:
You are attempting to select an item other
than [OFF] in [SCENE MODE] during colour
night view mode.
Others
Functions cannot be used
simultaneously
Some functions in the movie camera are disabled
or cannot be selected due to its specifications.
The table below shows examples of functions
restricted by conditions.
Functions Conditions which disable
the functions
≥Digital zoom ≥When the Card Recording
≥Fade
≥Image stabilizer ≥When the Card Recording
≥When the colour night
≥When the built-in LED
≥Backlight ≥When the iris/gain is set
≥When the colour night
compensation
≥When the built-in LED
≥Help mode ≥While recording to a tape
≥Blank search
≥Soft skin
≥Recording
check
≥Colour Night ≥While recording to a tape
≥When the Card Recording
View
≥When the built-in LED
≥Scene mode ≥When setting the
≥When the colour night
≥When the built-in LED
mode is used
mode is used
view function is used
video light lights and the
gain up mode is set to on
(NV-GS57 only)
view function is used
video light lights and the
gain up mode is set to on
(NV-GS57 only)
mode is used
video light lights and the
gain up mode is set to on
(NV-GS57 only)
[AUTO/MANUAL/FOCUS]
switch to [AUTO]
view function is used
video light lights
(NV-GS57 only)
51
LSQT1039