Blank Search Function; Recording A Still Picture On A Tape (Photoshot) (Nv-Gs27 Only) - Panasonic NV-GS27GCT Operating Instructions Manual

LSQT1039ENG.book 24 ページ ２００６年２月１日 水曜日 午後３時１３分

Blank search function

Searches for the last part of the image recorded
(unused part of the tape). After the search is
finished, the blank search function is cancelled
and the camera is put into recording pause.
≥Set to Tape Recording Mode.
1
Press the joystick to display the icon during
the recording pause. Move the joystick
down until icon 1 appears.
2
Move the joystick right to select the blank
search icon [ ].
3
When the confirmation message appears,
select [YES] and press the centre of the
joystick.
ª
Stopping blank search midway
through
Move the joystick down to select the [∫] icon.
≥If the cassette tape has no blank part, then the
camera will stop at the end of the tape.
≥The camera stops at a point approx. 1 second
before the end of the last image recorded.
When you start recording at that point, the
image can be recorded seamlessly from the last
image.
24
LSQT1039
Record mode
1
Recording a still picture on a tape
(Photoshot)
(NV-GS27 only)
Still pictures can be recorded from the movie
camera lens.
≥Set to Tape Recording Mode.
1
Press the [PHOTO SHOT] button in the
recording pause mode.
≥The movie camera records a still picture for
about 7 seconds and then switches back to
the recording pause mode.
≥If you set [ADVANCED] >> [SHTR EFFECT] >>
[ON], you can add image and a sound like
releasing the shutter.
≥Photoshot recording results in slightly inferior
image quality.
ª
Continuous photoshot
If you set [ADVANCED] >> [SHTR EFFECT] >>
[ON] and keep the [PHOTO SHOT] button
pressed, the movie camera will continuously
record still pictures in approx. 0.7 seconds
intervals until the button is released.
≥The screen blinks and, at the same time, a
shutter clicking sound is recorded.
PHOTO
SHOT