Optical Image Stabiliser
The camera detects jitter during recording and automatically corrects it, so you can record
images with reduced jitter.
A lens which supports the stabiliser function is required.
–
The interchangeable lens (H-HS12035, H-FS14140) supports the stabiliser function.
•
When using an interchangeable lens with O.I.S. switch (such as H-HS12035, H-FS14140), stabiliser
function is activated if the O.I.S. switch of the lens is set to [ON]. ([
∫ Setting the Stabiliser in the [Rec] menu
1
Select the menu. (P28)
>
MENU
2
Press 3/4 to select the item and then press [MENU/SET].
[
]
Vertical and horizontal shake are compensated for.
([Normal])
Camera shake is corrected for up/down movements.
[
]
This mode is ideal for panning (a method of taking pictures which involves
([Panning])
turning the camera to track the movements of a subject which continues to
move in a fixed direction).
[OFF]
[Stabilizer] does not work.
•
Exit the menu after it is set.
Calling frequently-used menus instantly
(Quick Menu)
By using the Quick Menu, some of the menu settings can be easily found.
•
The features that can be adjusted using Quick Menu are determined by the mode or a display
style the camera is in.
1
Press [Q.MENU] to display the Quick Menu.
2
Rotate the front dial to select the menu item.
3
Rotate the rear dial to select the setting.
4
Press [Q.MENU] to exit the menu once the
setting is complete.
[Rec] > [Stabilizer]
Preparation
] is set at the time of purchase)
Fn2
AFS
AFS
MOV
4:3
L
FHD
24
p
3.5
60
AU
0
TO
(ENG) VQT5H82
AWB
27