Stabiliser, Zoom and Flash
Optical Image Stabiliser
The camera detects jitter during recording and automatically corrects it, so you can record
images with reduced jitter.
There are two types of Optical Image Stabilisers, the one built into a lens and the one built
into this unit. The Optical Image Stabiliser of either a lens or this unit will be enabled.
Compatible Optical Image Stabilisers
∫
The Optical Image Stabiliser of either a lens or this unit works depending on the lens in
use.
Supporting the Optical Image
Stabiliser function
•
The interchangeable lens
(H-FS1442A) supports the Optical
Micro Four
Image Stabiliser function.
Thirds mount
specification
Not supporting the Optical Image
lens
Stabiliser function
•
The interchangeable lens
(H-H020A) does not support the
Optical Image Stabiliser function.
Four Thirds
Supporting the Optical Image
mount
Stabiliser function
specification
lens
•
Use a mount
Not supporting the Optical Image
adaptor
Stabiliser function
(DMW-MA1:
optional).
Leica mount specification lens
•
Use a Leica lens mount adaptor (DMW-MA2M,
DMW-MA3R: optional).
Lenses other than those listed above that can be
attached to this unit
Lens in use
Optical Image Stabiliser
Only the Optical Image
Stabiliser function of the lens
will be enabled.
Only the Optical Image
Stabiliser function of this unit
will be enabled.
Only the Optical Image
Stabiliser function of the lens
will be enabled.
Only the Optical Image
Stabiliser function of this unit
will be enabled.
Only the Optical Image
Stabiliser function of this unit
will be enabled.
Only the Optical Image
Stabiliser function of this unit
will be enabled.
203
function
P204
P206
P204
P206
P206
P206