Select A Drive Mode; Taking Pictures Using Burst Mode - Panasonic DMC-GH4 Basic Operating Instructions Manual

Select a Drive Mode

Applicable modes:
You can change what the camera will do when you press the shutter button.
Rotating the drive mode dial.
[Single]
[Burst] (P41)
[Auto Bracket] (P42)
[Self Timer] (P42)
[Time Lapse/
Animation] (P43, 45)

Taking Pictures using Burst Mode

Applicable modes:
•
Pictures taken with a burst speed of [SH] will be recorded as a single burst group.
1
Set the drive mode dial to [
2
Focus on the subject and take a picture.
•
Hold down the shutter button fully to activate the Burst Mode.
∫ Changing the burst speed
1
Select the menu. (P28)
>
MENU
2
Press 3/4 to select the burst speed and then press [MENU/SET].
Burst speed
(pictures/second)
Live View during Burst Mode
¢ The electronic shutter will operate.
When the shutter button is pressed, only one picture is recorded.
Recordings are made in succession while the shutter button
is pressed.
Each time the shutter button is pressed, recordings are made
with different exposure settings according to the Exposure
Compensation range.
When the shutter button is pressed, recording takes place
after the set time has elapsed.
Pictures are recorded with Time Lapse Shot or Stop Motion
Animation.
[Rec] > [Burst Rate]
[SH]
(Super high
speed)
None
].
¢ [H]
(High
speed)
12 (AFS)
40
7 (AFC)
None
Recording
MOV
4:3
AFS AFS
H
L
FHD 24 p
[M]
[L]
(Middle
(Low speed)
speed)
7 2
Available Available
(ENG) VQT5H82
41