[Disp.] Button (Switching The Displayed Information) - Panasonic DMC-GH4 Basic Operating Instructions Manual

Preparation
Even when the camera is operated using the touch screen, it is
possible to operate with the cursor button and [MENU/SET]
button if a guide like the one shown on the right is displayed.
Even on menu screens etc. on which the guide is not displayed,
you can make settings and selections by operating the buttons.
•
By assigning [Cursor Button Lock] to a function button, you can disable the cursor buttons, the
[MENU/SET] button, and the control dial. (P87)

[DISP.] button (Switching the displayed information)

Press [DISP.] to switch the information displayed on the
screen.
In Recording Mode
•
Screen will switch as follows:
(Example of monitor display)
With information
MOV 4:3
AFS AFS
L
FHD 24 p
98 98 98
0
¢1 It is displayed when the [Monitor Info. Disp.] of the [Custom] menu is set to [ON]. (P105)
Settings can be adjusted directly by touching each of the items displayed on the screen.
•
If you set [Guide Line] in the [Custom] menu, the guide lines are displayed. (P105)
•
If no operation is performed, part of the information on the screen will gradually become darker
after approximately 10 seconds has passed, and will no longer be displayed after
approximately 1 minute has passed. Pressing the [DISP.] button or touching the monitor will
make the display reappear. This operation is to prevent screen burn-in and is not a malfunction.
24
VQT5H82 (ENG)
Without
information
With information
(tilt sensor
display)
MOV 4:3
AFS AFS
L
FHD 24 p
98 98 98
0
Turned off
Without
information (tilt
sensor display)
On-monitor
recording
information ¢1
0 0
ISO
AUTO
0
AFS AFS 4:3 Wi-Fi Fn
L
98
AWB