Wi-Fi/NFC
When using an Android device
Setting up a connection using the NFC function
•
If [
] is not displayed on the smartphone, the NFC function of the smartphone is disabled.
Read the operating instructions of your smartphone and enable it.
•
This function can be used with the NFC compatible device with Android (OS version 2.3.3 or
higher). (excluding some models)
1
Launch " Image App" on your smartphone/
tablet.
2
While [
] is displayed on the screen of
the smartphone, touch the smartphone to
[
] of the camera.
3
When the connection confirmation screen
is displayed on the camera, select [Yes].
4
Touch the smartphone to [
camera again.
3
4
•
Steps
through
are not required from the second
time on.
•
For information on the operation and settings of
NFC-compatible smartphones, refer to the operating
instructions of your device.
When using an Android device
Using the QR code to set up a connection
1
Press and hold [Wi-Fi] on the camera.
2
Start "Image App" on your smartphone/tablet.
3
Select [QR code].
4
Scan the QR code displayed on the screen of
the camera.
A QR code
•
If you press [MENU/SET] on the camera, the QR code will
be enlarged. When it is difficult to scan the QR code, try
enlarging it.
80
VQT5H82 (ENG)
] of the
A