Battery charge
Problem
"Recharge battery" is
displayed, 7 flashes
or the handset beeps
intermittently.
"Charge for 6h" and
8 are displayed and
the handset does not
work.
I charged the battery fully,
but "Recharge
battery" is still
displayed and/or 7
continues to flash, or
"Charge for 6h" and
8 are displayed.
The CHARGE indicator
does not go out after the
battery has been
charged.
The handset display is
blank.
Power failure
Problem
The unit will not function.
For assistance, please call 1-800-211-PANA (7262).
Cause & solution
L Fully charge the battery (page 11).
L The battery has been discharged. Fully charge the
battery (page 11).
L Clean the charge contacts and charge again (page 11).
L The battery may need to be replaced (page 12). If you
install a new battery, fully charge it (page 11).
L This is normal.
L Confirm that the battery is properly installed.
L Fully charge the battery (page 11).
Cause & solution
L This product is not designed to make calls in the event
of a power failure. We recommend connecting a
standard telephone to the same telephone line in the
event that emergency calls need to be made during a
power failure (page 9).
Useful Information
63