Selecting A Video Signal To Be Output - Yamaha HTR-6295 Owner's Manual

Selecting a video signal to be output

This function enables this unit to output video signals
when "AUDIO1", "AUDIO2" or "MULTI CH" is selected
as the input source. Also, you can assign another video
input jack to "AV3" or "AV4" if the default combinations
of the audio/video input jacks on this unit do not
correspond to your external component.
1
Rotate the TINPUT selector (or press
dInput selection keys) to select "AV3",
"AV4", "AUDIO1", "AUDIO2" or "MULTI CH"
as the input source.
2
Press sOPTION on the remote control.
The Option menu for the selected input source is
displayed.
3
Press jCursor k / n to select "Video Out"
and then press jENTER.
Video;;;;;;Off
4
Press jCursor l / h to select a video input
jack to be used for the selected input source.
Input Audio Selectable video input
source input type
AV3
Coaxial HDMI3, AV 1/2
digital (COMPONENT VIDEO),
AV3-6 (VIDEO), Off (no
video output)
AV4 Optical HDMI4, AV 1/2
digital (COMPONENT VIDEO),
AV3-6 (VIDEO), Off (no
video output)
AUDIO1
Analog HDMI1, AV 1/2
(COMPONENT VIDEO),
AV3-6 (VIDEO), Off (no
video output)
AUDIO2 Analog HDMI2, AV 1/2
(COMPONENT VIDEO),
AV3-6 (VIDEO), Off (no
video output)
MULTI CH
Analog AV 1/2 (COMPONENT
VIDEO), AV3-6
(VIDEO), Off (no video
output)
5
To exit the Option menu, press sOPTION.
Default
jack
AV3
AV4
Off
Off
Off
Setting the option menu for each input source (Option menu)
43
En