Rear Turn Signal And Backup Lamp; License Lamps; Center High-Mounted Stoplamp - Jeep COMPASS 2015 Owner's Manual

Hide thumbs Also See for COMPASS 2015:

Table of Contents

Rear Turn Signal And Backup Lamp

1. Remove the two push-pins from the taillamp housing.

Taillamp Push-Pins

2. Grasp the taillamp and pull firmly to disengage the

lamp from the aperture panel.

3. Twist and remove socket from lamp.

MAINTAINING YOUR VEHICLE 519

4. Remove bulb from socket and replace.

1. Use a screw driver to gently pry against the side of the

snap tab to remove the lamp from the liftgate.

2. Rotate the socket 1/4 turn counterclockwise.

3. Pull bulb from socket.

This light is an LED assembly. See your authorized dealer

for replacement.

Table of Contents