Jeep COMPASS 2015 Owner's Manual page 133

• Some paging and voice mail systems have system time
out settings that are too short and may not allow the
use of this feature.
Barge In — Overriding Prompts
The "Voice Command" button can be used when you
wish to skip part of a prompt and issue your voice
command immediately. For example, if a prompt is
asking "Would you like to pair a phone, clear a...," you
could push the Voice Command
"Pair a Phone" to select that option without having to
listen to the rest of the voice prompt.
Turning Confirmation Prompts ON/OFF
Turning confirmation prompts off will stop the system
from confirming your choices (e.g., the Uconnect® Phone
will not repeat a phone number before you dial it).
1. Push the Phone button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131
2. After the "Ready" prompt and the following beep, say
one of the following:
• "Setup Confirmation Prompts On"
• "Setup Confirmation Prompts Off"
Phone And Network Status Indicators
If available on the radio and/or on a premium display
such as the instrument panel cluster, and supported by
your mobile phone, the Uconnect® Phone will provide
button and say,
notification to inform you of your phone and network
status when you are attempting to make a phone call
using Uconnect® Phone. The status is given for network
signal strength, phone battery strength, etc.
Dialing Using The Mobile Phone Keypad
You can dial a phone number with your mobile phone
keypad and still use the Uconnect® Phone (while dialing
via the mobile phone keypad, the user must exercise
caution and take precautionary safety measures). By
3