Fog Lamps; Rear Turn Signal And Backup Lamp - Jeep Compass 2013 Owner's Manual

Fog Lamps

1. Access lamp through the lower fascia cutout.
2. Remove electrical connector from bulb.
3. Remove bulb from housing.

Rear Turn Signal And Backup Lamp

1. Remove the two push-pins from the taillamp housing.
2. Grasp the taillamp and pull firmly to disengage the
lamp from the aperture panel.
3. Twist and remove socket from lamp.
4. Remove bulb from socket and replace.
I n f o r m a t i o n P r o v i d e d b y :
MAINTAINING YOUR VEHICLE 471
7