Jeep COMPASS 2015 Owner's Manual page 100

98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
1. Look behind the seating position where you plan to
install the child restraint to find the tether anchorage.
You may need to move the seat forward to provide
better access to the tether anchorage. If there is no top
tether anchorage for that seating position, move the
child restraint to another position in the vehicle if one
is available.
2. Route the tether strap to provide the most direct path
for the strap between the anchor and the child seat,
routing it over the center of the head restraint.
3. Attach the tether strap hook of the child restraint to
the top tether anchorage as shown in the diagram.
Tether Anchorage Locations
4. Remove slack in the tether strap according to the child
restraint manufacturer's instructions.