Panasonic CZ-256ESMC2 Operation Manual page 75

6 Using the System
For items 1 and 2, touch each input box and a soft keyboard will appear.
1 Input an optional user ID (within 20 characters).
2 Input an optional password (within 10 characters).
3 Users include three categories: "Administrator", "Special user", and "General user".
No. 000 denotes "Administrator" (A special user solely admitted; its initial user ID: administrator).
No.001 or higher denotes "Special user" if authority is set to , and "General user" if authority is
set to . Depending on the user, the functions available from the Web differ as follows.
Tenants affected
Prohibit remote control settings
Screen 3-3 Download
Screen 4-2 Alarm log
Screen 4-4 Sent mail log
Screen 6-3 Program timer
Screen 6-4 Ten.Ho/TimerSp.Day
Screen 6-5 Prohibit R/C
Screen 6-10 WEB setting
4 When touching the input box, the following small screen is displayed, where you set operatable
tenants by User ID.
5 Register the tenant selected on the left side into the right side as the operatable tenant.
6 Delete the tenant selected on the right side from among the operatable tenants.
7 Select all the tenants on the left side.
8 Cancel this tenant setting change.
9 Make register setting for this user as the operatable tenant.
bk Select all the tenants on the right side.
Administrator Special user
All tenants Specifi ed tenants
 
 
 
 
Confi rmation only

 Confi rmation only
 Confi rmation only
 
73
General user
Specifi ed tenants




Confi rmation only



5
6
7
8
9
bk
6 11 11
6 11
Main
Sub