6 Using the System
6.5.5 Performing manual cut-off processing and saving data
Use this screen to perform manual cut-off processing, and to back up setting and total data to
optional PC Cards.
6.5.5.1 Manual cut-off processing
Proceed as follows to manually perform cut-off processing.
Procedure
Select 2.Total data/Cut-off in the main menu and 5.Cut-off/Data backup in the sub menu.
1 Touch Cut-off .
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
2 When a window like the one shown below
appears, touch the OK button.
1.Each I/D unit
2.Each tenant
3.Each O/D unit
4.Pulse meter
5.Cut-off/Data backup
43
3 When a window like the one shown below
appears, touch the Check button.
2
5
2
5
Main
Sub
1
4
7
bk