Table of Contents
Advertisement
505NL_e.book Page 72 Thursday, July 10, 2003 4:56 PM
Using the Belt Clip
Optional Headset
Plugging an optional headset into the handset allows hands-free phone conversations.
Please use only the Panasonic KX-TCA89EX headset. While using the headset,
speakerphone is not available. To switch to speakerphone, disconnect the headset.
Wall Mounting
Hooks
Fasten the AC adaptor cord to
prevent it from being disconnected.
Wall Template
72
To remove
the belt clip.
Headset Jack
8 cm
Screws
8 cm
You can hang the handset on your belt
or pocket using the belt clip.
Connecting the Optional
Headset to the Handset
Open the headset jack
cover, and connect the
optional headset to the
headset jack as shown.
This unit can be mounted on a wall.
- Insert screws into the wall. The
centre of the screw holes should be
8 cm horizontally apart.
- Connect the AC adaptor and the
telephone line cord.
- Arrange the wires as shown, then
mount the unit.
• Make sure the scews are securely
fastened to the wall.
Advertisement
Table of Contents
