Table of Contents
Advertisement
505NL_e.book Page 56 Thursday, July 10, 2003 4:56 PM
Base Unit Settings
Call Options
To exit the operation, press
1
Press JOYSTICK
(or move).
4
Select "Call Option".
Selecting the Recall Time
You can change the duration of the recall time depending on the requirements of your
Network provider or PBX.
Follow steps 1 to 4 shown above, then:
5
Select "Recall".
• The factory preset is "Type 2" (110 ms).
Selecting the Pause Time
You can select the pause time to 3 or 5 seconds, depending on your PBX requirements.
Follow steps 1 to 4 shown above, then:
5
Select "Pause Time".
• The factory preset is "Short".
56
at any time.
2
Select "
Setting
Base".
6
Select "Type 1" (700 ms), "Type 2" (110 ms) or
"Type 3" (200 ms).
6
Select "Short" (3 sec.) or "Long" (5 sec.).
3
Enter 4-digit Base
Unit PIN.
(Factory Preset 0000)
Go to step 5.
Advertisement
Table of Contents
