Panasonic KX-TCD505NL Operating Instructions Manual page 46

505NL_e_03.fm Page 40 Monday, July 14, 2003 2:11 PM
SMS Feature (Text Message)
Setting the PBX Line Access Number
This feature is only for the phones connected to a PBX. This allows you to delete
automatically the PBX line access number (max. 4 digits) when you enter the destination
phone number of an SMS outgoing message from Phonebook, Redial or Caller ID lists.
To exit the operation, press
Follow steps 1 to 3 on the previous page, then:
4
Enter 4-digit Base
Unit PIN.
(Factory Preset
0000)
7
Enter Line Access
Number.
(max. 4 digits)
Turning the SMS Feature On/Off
To exit the operation, press
Follow steps 1 to 3 on the previous page, then:
4
Enter 4-digit Base Unit
PIN.
(Factory Preset 0000)
When the SMS feature is turned off;
•
If you send a message, a tone sounds and the message will return to the SMS incoming
list with " " attached.
FD
•
If you receive from SMS centre call, the message will not be received but SMS centre
phone number will remain in the Caller ID list.
• If you turn the SMS feature on, the unit will begin ringing (one ring) after other
connected telephones.
• The factory preset is "On".
40
at any time.
5
Select "PBX Prefix".
8
Press JOYSTICK.
at any time.
5
Select "SMS On/Off".
6
Select "On".
9
Select "Save", then
"Saved" is displayed.
6
Select "On" or
"Off".