Panasonic KX-TCD500AL Operating Instructions Manual page 45

Selecting the Recall Time
You can change the duration of the recall time depending on the requirements of your
telephone company or PBX.
Follow steps 1 to 4 of Call Options on the previous page, then:
5
Select "Recall".
• The factory preset is "Type 2" (100 ms).
• You can access Telstra's "EASY CALL" service by having the recall time set at 100
ms (this is the factory preset setting), and then follow Telstra's "EASY CALL"
instructions to operate this service.
Selecting the Pause Time
You can select the pause time to 3 or 5 seconds, depending on your PBX requirements.
Follow steps 1 to 4 of Call Options on the previous page, then:
5
Select "Pause Time".
• The factory preset is "Short".
Setting the Emergency Calls
Even if handset is in Call Bar Mode, you can make an emergency call.
Follow steps 1 to 4 of Call Options on the previous page, then:
5
Select "Emergency Call".
7
Enter Emergency Call Number.
• The factory preset is 000.
Base Unit Settings
6
Select "Type 1" (700 ms), "Type 2" (100 ms) or
"Type 3" (200 ms).
6
Select "Short" (3 sec.) or "Long" (5 sec.).
6
Select "Emergency Call1" to
"Emergency Call5".
8
Press JOYSTICK.
45