Auto Restart Control; Automatic Operation; Heating Operation; Cooling Operation - Panasonic CUG95KE Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Auto Restart Control

If there is a power failure, operation will be automatically restarted under the previous operation mode
and airflow direction when power is resumed. (When the operation is not stopped by remote control).
If you do not want the unit to restart automatically when power is resumed, switch off the power supply.
If you do not require Auto Restart Control, consult your dealer.
Auto Restart Control is not available when Timer or Sleep Mode is set.

Automatic Operation

At the start of the Automatic operation, Heating, Cooling or Soft Dry is
automatically selected according to the outdoor temperature, indoor
temperature and setting temperature.
The operation mode changes every half hour, when necessary.

Heating Operation

To warm up the room temperature upon your preference setting temperature.
Heat is obtained from outdoor air to warm up the room. When the outdoor ambient air temperature falls,
the heating capacity of the unit might be reduced. We recommend that you use an additional heating
device when the outdoor ambient air temperature is low.

Cooling Operation

To cool the room temperature upon your preference setting temperature.

Fan Operation

Circulates air throughout the room.
Purifies and deodorizes the air if the air purifying filter is used. Fan Operation is recommended during
seasons in which neither Heating nor Cooling is used.

Soft Dry Operation

Dehumidifies while maintaining the setting temperature. The Soft Dry Operation is recommended during
the rainy season.
If the room temperature exceeds the setting temperature, operation switches to Cooling.
The fan speed is rather slow during Soft Dry Operation.
The humidity may not decrease when the indoor temperature is lower than the setting temperature on the
remote control.
Notes
See page 12 on how to adjust the fan speed and airflow direction.
The Powerful and Sleep modes can be set during Automatic Operation.
(Ex) Setting Temperature to 25°C
36
35
34
33
S
C
H
32
O
31
O
E
30
F
O
29
A
T
28
L
T
27
I
26
I
25
D
N
N
24
R
23
G
G
22
Y
21
19
18
17
16
13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
Outdoor Temp.˚C
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cug125keCsg95keCsg125ke

Table of Contents