Changing The Owner Id; Shipping Condition - Panasonic DMR-E60 Operating Instructions Manual

Auto-Setup Restart, Download
You can use the SETUP menus to start Auto Channel setting if
Auto Setup (page 17) fails for some reason.
Preparation
≥Switch [DVD, TV] (19) to "DVD".
≥Press [FUNCTIONS] (11) to show the FUNCTIONS window.
After performing steps 1 to 2 of "Channel Settings"(page 67),
perform the following steps:
3 Use [3, 4] (10) to select "Auto-Setup Restart" or
"Download".
Press [ENTER] (10) to prepare for Auto Setup start
4
or Download start.
≥Press [ENTER] (10) again to actually start the Auto Setup or
the Download.
5
A message appears asking you to confirm the
operation.
≥Actual screens depend on the operation. Follow the on-
screen instructions.

Changing the Owner ID

You can change the [PIN number], [Name], [House No.] and
[Postcode].
Preparation
≥Switch [DVD, TV] (19) to "DVD".
≥Press [FUNCTIONS] (11) to show the FUNCTIONS window.
Use [3, 4, 2, 1] (10) to select "SETUP" and press
1
[ENTER] (10).
≥The SETUP screen appears.
Use [3, 4] (10) to select the "Settings" tab and
2
press [2] or [1] (10).
Use [3, 4] (10) to select "Owner ID" and press
3
[ENTER] (10).
Use [1] (10), and then use the numeric buttons (4)
4
or [3, 4, 2, 1] (10) to enter the current
[PIN number].
≥After entering the correct [PIN number], you can change the
[Name], [House No.] and [Postcode].
Owner ID
PIN number ¢¢¢¢
¢¢¢¢¢¢¢¢¢¢¢¢¢¢
Name
¢¢¢¢¢¢¢¢¢¢¢¢¢¢
House No.
¢¢¢¢¢¢¢¢¢¢¢¢¢¢
Postcode
RETURN
RETURN : leave
Press [ENTER] (10) to conclude the setting.
5
Use [3, 4, 2, 1] (10) and [ENTER] (10) to select
6
and change the desired information.
Press [RETURN] (28) to exit the Owner ID setting
7
menu.
ªTo Display the Owner ID setting menu
While stopped
Hold down [∫] (7) on the main unit for more than 5
seconds.
≥The PIN number is not displayed.
≥After 30 seconds, this menu automatically disappears.
Changing the unit's settings (continued)

Shipping Condition

The all settings in the SETUP screen return to the factory settings.
(except for the ratings level and the password, and owner ID
settings.)
Preparation
≥Switch [DVD, TV] (19) to "DVD".
≥Press [FUNCTIONS] (11) to show the FUNCTIONS window.
After performing steps 1 to 2 of "Clock Settings"(page 66),
perform the following steps:
Use [3, 4] (10) to select "Shipping Condition" and
3
press [ENTER] (10).
SETUP Shipping Condition
Warning—all stored
Tuning
tuning data will be lost !
Do you want to proceed ?
Settings
Disc
Yes No
Picture
Sound
Display
ENTER
Connection
RETURN
Use [2, 1] (10) to select "Yes" and press [ENTER]
4
(10).
Use [2, 1] (10) to select "Yes" and press [ENTER]
5
(10).
68