Panasonic DMR-E60 Operating Instructions Manual page 76

Displays
The display is dim.
"0:00" is flashing on the unit's
display.
"NO READ" appears on the unit's
display after using a lens cleaner.
Play
Play fails to start even when [1]
(26) is pressed.
Play starts but then stops
immediately.
"NO READ", "UNSUPPORT", "NO
DISC" or "NO PLAY" appears on
the unit's display.
No response when buttons
pressed.
A title or chapter doesn't play
when it is selected.
Picture distorted during search.
Alternative soundtrack and
subtitles cannot be selected.
Soundtrack/subtitle language is
different from the one selected
with the SETUP menus.
No subtitles.
Angle cannot be changed.
You have forgotten your ratings
password.
≥Go to Display in the SETUP menus and change the display's brightness with "FL Display".
(page 62)
≥The clock is not set.
Go to Settings in the SETUP menus and set the clock with "Clock". (page 66)
≥Take the cleaner out of the unit.
≥Insert the disc correctly with the label facing up. (page 20)
≥This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Audio, DVD-Video, Video CD,
CD and MP3 disc. (page 10)
≥The disc is dirty. Clean it. (page 70)
≥The disc may be badly scratched. (page 70)
≥You inserted a blank DVD-RAM or DVD-R.
≥If "
" appears on the television
the operation is prohibited by the unit or disc.
≥If the unit is not operating at all, press [
, TIMER] (14) again to turn the unit on. The unit may not be operating correctly due to
[
lightning, static electricity, or some other external factor.
≥The Child Lock function is activated. (page 56)
≥Some titles and chapters on DVD-Video are not played when you have changed the ratings
level. (page 64)
≥Some distortion is normal.
≥The languages are not recorded on the disc.
≥You may have to use the disc's own menus to select languages.
≥The language is not recorded on the disc. (page 61)
≥Subtitles are not recorded on the disc.
≥Turn the subtitles on. (page 47)
≥This function depends on software availability. Angles can only be changed during scenes where
different angles are recorded ("
≥Return the unit's settings to the initial state (factory setting).
With the tray open, keep pressing [:/6] and [5/9] (49) on the main unit
simultaneously for 5 or more seconds.
76
Troubleshooting guide (continued)
, TIMER] (14) to switch the unit to standby, then press
" appears on the display).