Front And Surround Speaker Assembly - Panasonic SC-HT1500 Operating Instructions Manual

1
STEP
Supplied Accessories
Make sure you have all the
indicated components before
assembly, setup, and connection.
Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥For assembly, use a Phillips-head screwdriver.
1
Attach the pipe to the large base.
1 Thread the speaker cable through the base.
≥For quicker threading, fold the cable lightly in half (do not crease), pass the
folded portion through the hole in the base, and then pull through the rest
of the cable.
Cable
Groove
2 Insert the pipe.
Insert the pipe while slightly pulling on the speaker cable.
Lessen excess
speaker cable.
1
2
Attach the stands to the front and surround speakers.
≥There is no difference between the right and left speakers and stands.
≥Using the polyfoam and packaging cover included with this unit may ease attachment.
1 Remove the mounting plate screw, and remove plate B.
Speaker
Packaging cover

Front and surround speaker assembly

∏ Front speaker units ∏ Surround speaker units ∏ Pipes
Thread the speaker cable
through here.
Hole for screw
2
Mounting plate screw
1
3
2
Plate B
3 Secure the pipe to the base.
Ensure the screw is securely fastened.
Rear side of base
The supplied stands are specially designed for attachment to
Panasonic SB-FS1501 front speakers and SB-PS1501 surround
speakers. Only use as indicated in this setup.
2 Place the pipe on plate A and attach plate B.
Rotate the pipe so that the flat side is facing away from the back of the
speaker.
Polyfoam
3 Secure the plate with the same screw removed in procedure 1.
2
∏ Large bases
∏ Washer screws
Cable
Washer screw
Plate B
[Note[
The stands with longer
cables are for the
Plate A
surround speakers.
Fit the offset into the slot and slide
plate B into the locked position.
Plate B
Offset
Slot
Align the surface of plate B so that it
is even with the pipe surface.
Plate B
Pipe
Plate A