Set Up The Model Option - Samsung MH18AP1(P2)-09 Service Manual

5. Set Up the Model Option

5-1 Setting Option Setup Method
Step 1 : Enter the Option Setup mode.
1 st Take out the batteries of remote control.
2 nd Press the temperature
insert the battery again.
3 rd Make sure the remocon display shown as
Step 2 : Enter the Option Setup mode and select your option according to the following procedure.
3
1
4
5 6
Setting is not required if you must
a value which has a
32
ex) Option No. :
button simultaneously and
1
2
2
3
4
5
6
default.
.
The default value is
Otherwise, push the button to
Every time you push the button, the display panel reads
repeatedly.
Push the button to set the display panel to
Every time you push the button, the display panel reads
. . .
Push the button to set the display panel to
Every time you push the button, the display panel reads
. . .
Do not touch the button because its default is
Unless the display panel reads
Push the button to set the display panel to
Every time you push the button, the display panel reads
. . .
Push the button to set the display panel to
Every time you push the button, the display panel reads
. . .
.
.
.
repeatedly.
.
repeatedly.
.
, push the button to
.
repeatedly.
.
repeatedly.
Samsung Electronics
or
.