Crankcase - Honda V 45 SABRE-VF750S 1982 Shop Manual

-
~ HONDA
~ V45 ~:~:
11. CRANKCASE
SERV ICE INFORMATION
CRANKCASE DISASSEMBLY
CRANKCASE ASSEMBLY
SERVICE INFDRMATIDN
GENERAL
11 - 1
11 - 2
11 - 3
• To service the piston, crankshaft, connecting rod and transmission, the crankcase halves must be separated.
• If a new crankcase is installed, perform
countershaft shim selection procedures iPage 13·8).
• Whenever the output gear case is removed, perform gasket selection procedures (page 11 ·6).
• The following parts must be removed before disassembling the crankcase.
Oil pan Refer to section 2
Oil
pump
Refer to section 2
Water pump Refer to section 6
Clutch/starter clutch Refer to section 7
Gear shift linkage Refer to section 8
Alternator Refer to section 9
Cylinder heads Refer to section 10
Starter motor Refer to section 21
Gear shift indicator switch
TORQUE VA LUES
9 mm bolt:
8 mm bolt:
6 mm bolt:
TOOLS
Special
Driver
Commo n
Attachment, 62 )( 68 mm
Pilot, 25 mm
Date of lS$ue: October, 1982
© HONDA MOTOR CO., lTD .
30-34 N·m (3.0-3.4 kg·m, 22-25 ft·lb)
21-25 N·m (2. 1-2.5 kg·m, 15-18 ft·lb)
10-14 N·m (1.0-1.4kg·m, 7-10
ft-Ib)
07946-37 10000
07746-0010500
0774 6-0040600
---
>5,
•
11-1