The Marks On The Camshafts Mean - Honda V 45 SABRE-VF750S 1982 Shop Manual

•
~ HOND.A
~ V45 ~~:::
Place the camshafts through the cam chain and into
their correct positions as noted by the sprocket
flange directions during disassembly.
The marks On the camshafts mean:
EX: R (E Rl- - Rear cylinder exhaust
IN : R (tR) - - Rear cylinder intake
EX: F (EF) - - Front cylinder exhaust
IN: F (IF) - - Front cylinder intake
If the front cylinder camihaft sprockets were not
indexed during removal, follow the procedure
below:
Index the f ront cylinder camshaft sprockets, six
teeth from the original punch marks as shown on
the template. Use a water proof marker.
Clean the sprockets with contact cleaner and wipe
dry.
On a piece of paper, draw two Hnes one vertical,
one horizontal (perpendicular to each other, goo).
Use a protector and draw two diagonal tines at a
45
0
angle. Center the sprocket on the lines with
the original punch marks aligned on the hoirzontal
line.
Make new index marks on the sprocket where the
45
D
diagonal lines cross the sprocket.
NOTE:
It is not necessary to make new inde)( marks
for the rear cylinder's camshafts sprockels.
Align the CUtouts in the camViatt sprockets with the
camshaft lobes and place the sprockets over the
camshafts.
Install the camshaft holders but do not torque the
bolts yet .
Date of Issue: October, 1982
() HONDA MOTOR CO ., LTD .
-
-
-
--
,.,
CYLINDER HEADN ALVE
INDEX MARK
I
INDEX MAAK OAIGINAL PUNCH
MARKS
10-19
-
--