Siemens SINUMERIK 828D Service Manual page 24

Service cases - software
3.2 Series commissioning
4. Activate "Series startup".
5. Select the desired control components.
6. Press the "Generate archive" softkey.
7. Select the storage location of the archive:
24
The "Create Series Startup" window opens.
Note
Easy Archive
 Select all of the components, unless it is known that individual components do not
deviate from the Siemens standard.
 Select all data classes, unless only certain data (e.g. INDIVIDUAL) are to be backed
up.
The "Generate Archive: Select Archive" window opens.
– USB: USB-FlashDrive at the rear, slot X135
– USER USB: USB-FlashDrive in slot X125 at the front
– User CF: CompactFlash Card in the slot at the front
Hardware and Software
Service Manual, 03/2010, 6FC5397-5DP20-0BA0