Table of Contents
Advertisement
APPENDIX A – ADDITIONAL SETTINGS
OPTIONS
Since the factory default settings for the S900 may not match a
particular application, you can set up user defaults by using the
Additional Settings button in conjunction with the adjacent Arrow
Keys. Having made the user settings, use the Save Settings button to
save them as the new default. To return to the original factory default
settings, if required, hold down the All Clear button for 5 seconds.
The options available under each menu item displayed in the LCD
(selectable by using the adjacent Arrow Keys) are as follows:
PIN Setting
Enable
l
Disable
l
If required, refer to Appendix B for detailed information about
PIN setting.
Printer Profile
ES 3037 (7)
l
ES 3037e (7)
l
Media Type
Plain Paper
l
Ultra Heavy
l
Transparency
l
If Ultra Heavy or Transparency is set, Duplex, Staple, Hole
Punch, Output Tray, Multi-Purpose Tray settings are changed
to the following.
Duplex: OFF
Staple: OFF
Hole Punch: OFF
APPENDIX A – ADDITIONAL SETTINGS OPTIONS > 39
English
Advertisement
Table of Contents
