Table of Contents
Advertisement
CONNECTING THE CABLES
Connect the cables as shown.
1
1.
IEEE1394 cable – to the IEEE1394 data port on the printer.
2.
USB cable – to the PC's USB port. Only required for scanning
images into the PC (and upgrading firmware). Does not
support printing from the PC via USB.
3.
ADF cable – attached to the ADF if present.
Do not connect AC power to the S900 until you have unlocked the
scanning head, otherwise damage to the Scancopier may result.
3
CAUTION!
24 < INSTALLING THE SCANCOPIER (AND ADF)
2
Advertisement
Table of Contents
