Error Messages - Panasonic EB-SA7 Operating Instructions Manual

Error messages

These are some of the most important error messages which may
be displayed:
Location area not
allowed!
Network not allowed!
Security failure!
SIM blocked
Restarting SIM.
Please wait
Invalid SIM
Function unavailable
PIN2 invalidated
Message rejected.
Storage full
or
Message rejected.
SIM full
Roaming in the selected area is not allowed.
Roaming with the selected network is not allowed.
The network has detected an authentication
failure because your SIM card is not registered
with that network - contact your service provider.
The SIM card is blocked because the PIN
unblocking key (PUK) has been entered
incorrectly 10 times - contact your service
provider.
The phone has detected a problem with the SIM
card - switch the phone off and then back on; if the
message is still displayed - contact your service
provider.
The SIM card has failed one or more of the SIM
personalisation checks - contact your service
provider.
The selected feature is either not supported by the
SIM card or is not available with the current
subscription - contact your service provider.
The PIN2 is blocked permanently because the
wrong PUK2 has been entered 10 times, services
controlled by PIN2 cannot be used - contact your
service provider.
A message has been received but the message
store is full - to receive messages, delete some of
the currently stored messages.
Appendix
155