question and lead to failure of
5
safety-relevant functions. Dam-
age caused in this way is not
44
covered by the warranty.
Do not tamper with the vehicle
in any way that could result in
tuned performance.
Checklist
Use the following checklist to
z
check important functions, set-
tings and wear limits before you
ride off.
Brakes
Brake-fluid levels, front and rear
Clutch
Shock absorber setting and
spring preload
Tyre-tread depth and tyre
pressures
Cases correctly installed and
luggage secured
At regular intervals:
Engine oil level (every refuelling
stop)
Brake-pad wear (every third
refuelling stop)
Tension and lubrication of the
drive chain
Starting
Starting engine
Kill switch 1 in run position.
OE
with anti-theft alarm
If applicable, switch off the anti-
theft alarm.
Gearbox lubrication is en-
sured only when the engine
is running. Inadequate lubrication
can result in damage to the gear-
box.
Do not allow the motorcycle to
roll for a lengthy period of time or
push it a long distance with the
engine switched off.
Switch on the ignition.
Pre-ride check is performed.
(
45)
ABS self-diagnosis is
performed. (
46)
OE
with anti-theft alarm
If the anti-theft alarm LED lights
up, the immobiliser is active. The
engine cannot be started.
Use the remote control to
switch off the immobiliser.
Wait until the warning light for
the coolant temperature stops
flashing.