Lighting - BMW G 650 GS Sertão Rider's Manual

8
82
Squeeze latches 1 together
and remove the fuse cover.
Use the tool from the on-board
toolkit to pull the defective fuse
z
up and out of the fuse box.
If fuse defects recur fre-
quently have the electric
circuits checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Install the fuse
Replace the defective fuse with
a fuse of the correct amperage
rating.
The fuse assignments and
fuse amperage ratings spe-
cified for your motorcycle are lis-
ted in the section entitled "Tech-
nical data". The figures in the
graphic correspond to the fuse
numbers.
Close the fuse cover.
The latch engages with an
audible click.
Install the seat ( 39).

Lighting

Replacing bulbs for low-
beam and high-beam
headlight
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove screw 1 and work the
instrument panel up and out of
its holders.
Lay the instrument panel aside.
Switch off the ignition.