Westinghouse WRB3504S User Manual page 9

REVERSING THE DOOR (CONTINUED)
8. Change handle to the desired side and reinstall it as
shown below.
9. Detach door stopper and limit block as shown and
reinstall on the opposite side of the door.
self
tapping
screws
9. You will need to access the bottom of the refrigerator
for this part of the installation. Remove the adjustable
bottom feet and unscrew the special flange self
tapping screws. Unscrew and remove the front foot
fixed board and the right lower hinge.
front foot
fixed board
10. Unscrew the washers and remove the lower hinge
axis from the far hole and screw it into the near hole
as per the picture below. Replace the washer.
11. Swap the positions of the the front foot fixed board
and the right lower hinge and re-attach. Screw in the
special flange self tapping screws and replace the
adjustable bottom feet.
door
stopper
limit
block
12. Remove the corner cover from the refrigerator door
place it to one side.
lower hinge
adjustable
bottom feet
special flange
self tapping
screws
washer
hinge access
front foot
fixed board
lower
hinge
corner
cover
REVERSING THE DOOR
special flange self
tapping screws
adjustable
bottom feet
9