Main Supported Signals - Fujitsu LPF-D711W User Manual

Table of Contents

Advertisement

MAIN SUPPORTED SIGNALS

This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of
the first input signal.
To do this, select a desired signal and follow the instructions in "Adjusting Screen Position and Size" on P. E-46 to adjust the parameters.
When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be displayed in
accordance with the settings you most recently selected.
Main corresponding signals (RGB mode)
Display (dots x lines)
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1600 x 1200
848 x 480
852 x 480
1360 x 768
720 x 485
720 x 575
* With some input signals, "Out of range" may appear even when the horizontal and vertical frequencies are within their permissible
ranges. In this event, match the input signals to another frequency rather than those listed above.
* In the DVI-D mode, the input signal can be restricted partly.
In the Comp.video and Video/S-video, the display has been factory-set as follows for different input signals:
Main corresponding signals (Comp.video mode)
Horizontal
frequency (kHz)
15.73
15.63
31.47
31.25
45.00
37.50
33.75
28.13
Note
• Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.
• "Out of range" appears if the display receives a signal whose characteristic does not fall within the display's permissible range.
• You can check input signals through "Information" on the FEATURES Menu screen. (See P. E-52.)
• In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.
• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.
E-60
Downloaded From projector-manual.com Fujitsu Manuals
Horizontal frequency (kHz) Vertical frequency (Hz)
31.47
37.50
43.27
31.47
37.88
46.88
53.67
48.36
60.02
68.68
63.98
79.98
75.00
31.02
31.72
47.71
15.73
15.63
Vertical
Signal
frequency (Hz)
59.94
SDTV 480i
50.00
SDTV 576i
59.94
SDTV 480p
50.00
SDTV 576p
60.00
HDTV 720p
50.00
HDTV 720p
60.00
HDTV 1080i
50.00
HDTV 1080i
59.94
VGA
75.00
VGA 75 Hz
85.01
VGA 85 Hz
70.09
400 lines
60.32
SVGA 60 Hz
75.00
SVGA 75 Hz
85.06
SVGA 85 Hz
60.00
XGA 60 Hz
75.03
XGA 75 Hz
84.99
XGA 85 Hz
60.02
SXGA 60 Hz
75.03
SXGA 75 Hz
60.00
UXGA 60Hz
60.00
59.97
60.01
59.94
60 fields
50.00
50 fields
Main corresponding signals (Video, S-video mode)
Horizontal
HDMI
frequency (kHz)
15.73
15.63
15.63
15.63
15.63
15.73
15.73
Signal
DVI-D
Vertical
Signal
frequency (Hz)
59.94
NTSC
50.00
PAL
50.00
SECAM
59.52
PAL60
50.00
N-PAL
59.95
M-PAL
59.94
4.43NTSC

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lpf-qsd1w

Table of Contents