Fujitsu LPF-D711W User Manual page 15

AV SELECTOR SECTION – REAR
Audio input terminals
Input audio through the terminals corresponding to the used video input terminals.
* The digital input terminals can be matched as desired with the remote control. (See P. E-35.)
Audio output terminals
For use when the audio from an audio system (amplifier) is used.
Video1 input terminal
Video2 input terminal
Video4 input terminal
Connect this terminal to the component video output terminal, S-video output terminal, or video output terminal of your VCR or DVD,
etc.
* See "SETTING THE INPUT TERMINALS" on P. E-49.
Video5 input terminal
Video6 input terminal
Connect this terminal to the component video output terminal of your DVD, etc.
Video 7 input terminal
Connect this terminal to HDMI output terminal of your DVD.
RGB1 input terminal
Connect this terminal to the monitor (DVI-D) output terminal of your PC.
RGB2 input terminal
Connect this terminal to the monitor (mD-sub) output terminal of your PC.
RS-232C input terminal
Connect this terminal to the RS-232C output terminal.
Display Output Terminal (PICTURE/AUDIO)
Connect this terminal to the picture input terminal on the projector. (The audio output terminal is not in use.)
Power input terminal
Connect this terminal to the power cable supplied with the display.
When connecting a cable, attach a ferrite core to the cable. (See P. E-20.)
E-15
Downloaded From projector-manual.com Fujitsu Manuals