Table of Contents
Advertisement
OTHER ADJUSTMENTS (Continued)
ON SCREEN MENU
• Setting Display Information (OSD)
You can use this option to select whether to display information other than menus. (Error messages are
displayed regardless of what choice you make for this option.)
Each time you press
[On (OSD:bright)]: On-screen information shown in light color.
[On (OSD:dark)]: On-screen information shown in dark color.
[Off]: Except for menus and error messages, on-screen information is not displayed.
Press
to store.
* When the screen is white [On (OSD:dark)], some of the information may be difficult to read.
• Selecting Language (Language)
You can use this option to select the language displayed on the screen.
(1) Select "Language" and press
The "Language" selection screen will appear.
(2) Press
English
Deutsch
Español
Français (French)
Italiano
Português (Portuguese)
Ðóññêèé (Russian)
(3) Press
The menu is displayed in the selected language.
• Selection of indications (Name Select)
You can change the settings for indications for video inputs and RGB inputs.
Video input
You can change the settings for indications for the VIDEO inputs.
Select the desired indication in accordance with the connected equipment.
Each time
Press
to store.
RGB input
You can change the settings for indications for the RGB inputs.
Select the desired indication in accordance with the connected equipment.
Each time
Press
to store.
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-48
Downloaded From projector-manual.com Fujitsu Manuals
or
, one of the available choices appears in the following sequence:
.
or
to select your desired language.
(Japanese)
(German)
(Spanish)
(Italian)
.
is pressed, the setting is switched. (In the case of VIDEO1)
is pressed, the setting is switched. (In the case of RGB 1)
OSD selection screen
"Language" selection screen
Advertisement
Table of Contents
