Fujitsu LPF-D711W User Manual page 23

VCR
• Connect the video signal cable to either the S-video input terminal or the video input terminal.
• If the unit to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.
Note
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
Downloaded From projector-manual.com Fujitsu Manuals
To video output
To audio outputs
To S-video
output
To audio inputs
To S-video input
To video input
Rear side of AV Selector
E-23