Adjusting The Picture - Fujitsu LPF-D711W User Manual

ADJUSTING THE PICTURE

• Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURE OF ADJUSTMENT MENU
OPERATIONS on page E-39 for the basic operation procedures.
Adjusting the Signal Contrast
Press to increase the input signal contrast.
Press to reduce the input signal contrast.
Press to store.
Adjusting the Drive Contrast
Press The illumination level rises and the contrast increases over all gradation.
Press The illumination level lowers and the contrast reduces over all gradation.
Press to store.
Adjusting the Brightness
Press to increase the brightness.
Press to reduce the brightness.
Press to store.
Adjusting Color
Press to darken the color.
Press to lighten the color.
Press to store.
Adjusting the Tint
Press to change the tint to a more greenish color.
Press to change the tint to a more purplish color.
Press to store.
Adjusting the Sharpness
Press to sharpen the Sharpness.
Press to soften the Sharpness.
Press to store.
Setting the Picture Mode
Picture mode changes by pressing
be set up automatically.
[Natural]: Displays a screen with detailed contrast.
[Fine]: Suitable for watching a dark picture such as a movie.
[Effective]: Enables you to watch pictures with natural color tones and high picture clarity.
[Conventional]: Similar picture to CRT screen.
[Still]: Suitable for viewing a still picture.
Press to store.
Setting the luminance of the light source lamp
Each time you press
Normal Low
[Normal]: The luminance of the lamp is set at the standard level.
[Low]: The luminance of the lamp is lowered. This setting can reduce the power consumption of
the lamp to save energy.
Press to store.
E-40
Downloaded From projector-manual.com Fujitsu Manuals
or , and the optimum -curve for each picture mode shall
This mode is suitable for watching a normal motion picture.
or , the luminance of the light source lamp changes over.