TP-Link TD-VG5612 User Manual page 16

TD-VG5612
VoIP1/ VoIP2
WPS
LAN(1-4)
USB
3G

Note:
1. If the DSL LED is off, please check your Internet connection first. Refer to
Modem Router for more information about how to make Internet connection correctly. If you
have already made a right connection, please contact your
service is available now.
2. If the Internet LED is off, please check your DSL LED first. If your DSL LED is also off, please
refer to Note 1. If your DSL LED is GREEN ON, please check your Internet configuration. You
may need to check this part of information with your ISP and make sure everything have been
input correctly.
3. You can also refer to
300Mbps Wireless N VoIP VDSL/ADSL Modem Router User Guide
Off The wireless function is disabled.
On
The corresponding phone is off-hook.
Off The corresponding phone is on-hook.
It turns on when a WPS synchronization is established and
On/Off
automatically turns Off about five minutes later.
WPS handshaking is in process and will continue for about 2
minutes. Please press the WPS button on other wireless devices
Flash
that you want to add to the network while the LED is flashing.
On
The corresponding LAN port is connected.
Off
The corresponding LAN port is not connected.
On
The USB device is identified and ready to use.
Flash
A new USB device is being identified.
Off No USB device is plugged in to the USB port.
On 3G Internet is successfully connected.
Flash
The modem router is connecting to the 3G Internet.
3G Internet is not connected or the modem router is operating in
Off
other modes.
4.8.2 WPS Settings
ISP to make sure
for more information.
5
2.3 Connecting the
if your Internet