Lincoln MKZ Owner's Manual page 328

Hide thumbs Also See for MKZ:
Table of Contents

Advertisement

Always set the parking brake to ensure
the vehicle doesn't move unexpectedly.
Do not remove any foreign objects, such
as nails or screws, from the tire.
When using the kit, leave the engine
running (only if the vehicle is outdoors or
in a well-ventilated area) so the
compressor does not drain the vehicle's
battery.
Do not allow the compressor to operate
continuously for more than 15 minutes.
This will help prevent the compressor
from overheating.
Never leave the kit unattended during
operation.
Sealant compound contains latex. Those
with latex sensitivities should use
appropriate precautions to avoid an
allergic reaction.
Keep the kit away from children.
Only use the kit when the ambient
temperature is between -22°F (-30°C) and
158°F (70°C).
MKZ (CC9) Canada/United States of America, enUSA, Second Printing
Wheels and Tires
Only use the sealing compound before
the use-by date. The use-by date is on a
label on the sealant canister and can be
seen through the rectangular viewing
window on the bottom of the compressor.
Check the use-by date regularly and
replace the canister after four years of
non-use.
Do not store the kit unsecured inside the
passenger compartment of the vehicle
as it may cause injury during a sudden
stop or crash. Always store the kit in its
original location.
After sealant use, the tire pressure
monitoring system sensor and valve stem
on the wheel must be replaced by an
authorized Ford dealer.
Operating the kit could cause an
electrical disturbance in radio, CD, and
DVD player operation.
* When inflation only is required for
a tire or other objects, the selector
E175978
must be in the Air position.
325
What to do when a Tire Is Punctured
A tire puncture within the tire's tread area
can be repaired in two stages with the kit.
In the first stage, the tire will be reinflated
with a sealing compound and air. After
the tire has been inflated, you will need
to drive the vehicle a short distance
(about 4 miles [6 kilometers]) to distribute
the sealant in the tire.
In the second stage, you will need to
check the tire pressure and adjust, if
necessary, to the vehicle's specified tire
inflation pressure.
First Stage: Reinflating the Tire with
Sealing Compound and Air
WARNINGS
Do not stand directly over the kit while
inflating the tire. If you notice any
unusual bulges or deformations in the tire's
sidewall during inflation, stop and call
roadside assistance.
If the tire does not inflate to the
recommended tire pressure within 15
minutes, stop and call roadside assistance.

Advertisement

Table of Contents
loading

Table of Contents