Bulb Specification Chart - Lincoln MKZ Owner's Manual

Examples of acceptable condensation are:
• Presence of thin mist (no streaks, drip
marks or droplets).
• Fine mist covers less than 50% of the
lens.
Examples of unacceptable moisture (usually
caused by a lamp water leak) are:
• Water puddle inside the lamp.
• Large water droplets, drip marks or
streaks present on the interior of the lens.
Headlamp high beam
Headlamp low beam
Side marker lamp - front
Park lamp - front
Turn lamp - front
Tail and brake lamp - high series
Tail and brake lamp - low series
Reverse lamp
MKZ (CC9) Canada/United States of America, enUSA, Second Printing
Maintenance
Take your vehicle to a dealer for service if
any of the above conditions of unacceptable
moisture are present.
Replacing Bulbs
For replacing bulbs, see your authorized
dealer.
Function

BULB SPECIFICATION CHART

Replacement bulbs are specified in the chart
below. Headlamp bulbs must be marked with
an authorized "D.O.T." for North America to
make sure they have the proper lamp
performance, light brightness, light pattern,
and safe visibility. The correct bulbs will not
damage the lamp assembly or void the lamp
assembly warranty and will provide quality
bulb illumination time.
303
Trade name
LED
LED
LED
LED
LED
LED
LED
LED