Searching By Name - Clarion NX706 Owner's Manual

8. (optional) The Places in the list can be ordered by the following criteria:
•
Name
•
Their distance from the current or last known position
•
Their distance from the selected town
•
Their distance from the destination
•
The length of the necessary detour.
Tap to reorder the list.
To filter the list of results by providers, tap
screen.
9. Browse the list and tap one of the list items. A full screen map appears with the selected point in
the middle.
10. The process continues the same way as in case of any other search for Places. See page 37.

3.1.3.3 Searching by name

To search for a Place by name, browse the various Place categories, or use the mixture of the two search
types, perform the following steps:
1. Tap on the Navigation view to access the Navigation menu.
2. Tap and
3. Tap
4. Select the area around which you would like to search for the Place. By default, the search area is
around the current position (or if it is not available, around the last known position). In this case,
the result list is ordered by the distance from this position. Tap
the following search areas:
•
Tap
ordered by the distance from the center of the selected town.)
•
Tap
(The result list is ordered by the distance from the destination.)
.
to open the Search By Name or Category window.
to search for a place within a selected town. (The result list is
to search for a place around the destination of the planned route.
and then the provider logo on the right side of the
to select one of
Clarion NX706 English 41