Panasonic Panaboard KX-BP800 Operating Instructions Manual page 75

4
Attach the power cord.
1. Securely fit the supplied power
cord into the AC inlet on the
printer unit.
AC Inlet
2. Fit the power cord into the cord
holder. Do not force it.
Power Cord
Cord Holder
Assembling the Print Board
5
Wipe the screen film surface.
Wipe the screen film gently with a
water-dampened cloth that has
been thoroughly wrung.
Note
CDo not use thinner, benzine or cleaners
containing abrasives as this may result in
discoloration.
CDo not wipe the screen film with a dry
cloth as this may generate a static
charge.
6
Check operations.
Refer to page 76 "Print Board
Operations Check".
75