Connection with Rear View Camera
Note:
¡ Refer to the operating instructions for the connected devices, in addition.
CQ-VD6503N (Rear)
i Power Connector
Reverse Lead
(Violet/white stripe)
Connecting the Reverse Lead
If using an optional rear view camera, the reverse lead must
be connected.
Connect the reverse lead (violet/white stripe) to the positive (+)
lead of the reverse lamp (the lamp with a clear lens that lights
when the transmission gear is shifted into the reverse position).
Note:
¡Connect the reverse lead after cutting the terminal at the end.
¡Use a Reverse Extension Cord o if needed.
o Reverse Extension Cord
(Violet/white stripe)
8 m m M A X
F U S E 1 5 A
F U S E 1 5 A
F U S E 1 5 A
> P B T <
J A M - S A a
Camera Input Terminal
(Yellow)
Reverse lamp
Camera Input
Rear View Camera (option)
(Video)
(Yellow)
RCA Cord (option)
Clip connector
(option)
Rear View Camera
Control Unit (option)
(Video)
(Yellow)
Check the reverse lamp.
Take it out of the back of
the tail lamp mount.
Car chassis
Battery
P
R
Transmission gear
N
D
2
L
CQ-VD6503N
16
17